Surely you can’t buy this - is it too gross? Mix and mould the ultimate Booger Bombs! Drop into the face, add secret Nose Drops and be horrified as a gusher of ‘stuff ‘ hoses out of the nose into the mouth or even the ear! Exploding Zit Mix? That's...

Delivers 55W of charging powerCharges AND balances Smart G2 batteries with one simple IC3 or IC5 connection - no separate balance lead neededCharges up to 4S LiPo/LiFe/Li-Ion/LiHV batteries and 1-12S NiMH/NiCd packsPowerful 50C continuous discharge...

/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer & Reproductive Harm - California Proposition 65 - www.P65Warnings.ca.gov

/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer & Reproductive Harm - California Proposition 65 - www.P65Warnings.ca.gov

Compatible with both EC3 and IC3 plugs.Integrated microchip stores unique parameters for each batterySmart discharge allows batteries to automatically discharge to a safe voltageSave time and hassle, while improving battery lifePowerful 50C...

146 oz-in torque at 6V affords impressive performance in the toughest applicationsPrecise digital controlDual ball bearings provide less resistance for higher performance and longer lifeHeavy-duty metal gear train/!\ WARNING: CHOKING HAZARD - Small...

Product Height: 0.9" (23 mm)Servo Type: AnalogBushing Or Bearing: BushingGear Type: PlasticProgrammable: NoApplication: AirplaneSpline Count: 21 TeethConnector Type:UniversalConnector Wire Length: 17.71" (450 mm)Product Width: 0.8" (20...

Maximum Servo Torque:82oz-in, 5.9kg-cm at 6vServo Operating Voltage:6.0VProduct Width: 0.79" (20 mm)Input Voltage: 6vProduct Height: 1.55" (39 mm)Spline Count: 23 - ToothProduct Length: 1.58" (40 mm)Gear Type: Nylon/!\ WARNING: CHOKING...

The RPM Arrma 4x4 Rear Suspension Arm Set is compatible with 4 ɬó4 3S BLX versions of the Granite and Senton. These optional arms offer increased adjustability, improved durability and reduced weight. Adjustability: RPM added a second shock mount to...

The RPM Arrma 4x4 Front Suspension Arm Set offers increased adjustability and improved durability in a lightweight package. Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount, adding...

Replaces weaker stock componentsProudly made in the USAThis is an optional RPM Wide Front Bumper, and is intended for use with the Traxxas Rustler, Stampede and Bandit 1/10 scale vehicles. Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro...

Replaces weaker stock componentsProudly made in the USAThis is an optional RPM Wide Front Bumper, and is intended for use with the Traxxas Rustler, Stampede and Bandit 1/10 scale vehicles. Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro...

RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this...

The RPM Arrma Typhon 4x4 3S BLX Front Suspension Arm Set offers increased adjustability, improved durability and reduced weight. Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount,...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USAThese rear shock towers can be used on the Traxxas Bandit as well, However, there are no provisions for a rear wing built in/!\ WARNING: CHOKING HAZARD - Small...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USARPM #80712 Caster Blocks replace Traxxas stock #3632 Caster Blocks/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer...

For the Traxxas Slash 4x4 and Stampede Front or Rear A-armsTech Notes: Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the...

Designed to increase durabilityReplaces weaker stock components, check for full parts compatibilityReplaces stock Traxxas #3752; 5x11x4mm bearings not includedUp to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or...

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM's front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...