For the Traxxas Slash 4x4 and Stampede Front or Rear A-armsTech Notes: Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the...

Designed to increase durabilityReplaces weaker stock components, check for full parts compatibilityReplaces stock Traxxas #3752; 5x11x4mm bearings not includedUp to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or...

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM's front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, and Monster JamTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is a set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede...

For use on the E-Rustler, Stampede, and Monster JamTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is a set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede...

Replaces weaker stock components, check for full parts compatibilityReplaces stock Traxxas #2530 and #2530AFits the Slash 2WD, Nitro Slash, Bandit, Electric Rustler, Nitro Rustler, Nitro Stampede and Electric Stampede 2WD/!\ WARNING: CHOKING HAZARD -...

The RPM Traxxas 2WD Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can...

This is an optional RPM Hybrid Gearbox Housing and Rear Mount Kit, and is intended for use with the Traxxas Slash, Stampede, e-Rustler and Bandit 1/10 scale vehicles. The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2WD vehicles is designed to...

This is an optional RPM Traxxas 4x4 Caster & Spindle Block Set. Since the release of the first Slash 4x4, RPM customers have been asking for stronger front end components that could handle the punishment Traxxas 4wd trucks can dish out. RPM answers the...

This is a set of optional RPM Axle Carriers, and are intended for use with the Traxxas 1/16 E-Revo and 1/16 Slash trucks. There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale...

This is an optional pack of RPM EXC Torment, Ruckus & Circuit Rear A-Arms. They're stronger than stock, beefier to help survivability during those unexpected incidents, and built to tighter tolerances, making critical suspension settings much easier to...

/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer & Reproductive Harm - California Proposition 65 - www.P65Warnings.ca.gov

Connect a Tamiya/Molex charger or ESC plug to a Deans battery/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer & Reproductive Harm - California Proposition 65 - www.P65Warnings.ca.gov

Completely Adjustable Body Mounts for Fitting Different Style Bodies on to your Rustler 4x4Innovative Screw-on Body Mounting System using Secure-Loc CapsMade from Ultra-Durable Nylon/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3...

These smaller 8x10 paint by numbers kits were designed because of YOU, our amazing customers. You asked for smaller, less intricate kits that would take fewer hours to complete and we're happy to bring you something totally fresh and new. Each Mid...

Use for office planning or architectural models. May also be used to add extra detail to your model railroad layout building interiors. Some assembly required on most items. Precision Injection Molded in Styrene Plastic. 7/8" H 1 1/16" W/!\ WARNING:...

This is a replacement ParkZone Motor, and is intended for use with the ParkZone Sukhoi SU-26XP. /!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer & Reproductive Harm - California Proposition 65 - www...