RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this...

The RPM Arrma Typhon 4x4 3S BLX Front Suspension Arm Set offers increased adjustability, improved durability and reduced weight. Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount,...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USAThese rear shock towers can be used on the Traxxas Bandit as well, However, there are no provisions for a rear wing built in/!\ WARNING: CHOKING HAZARD - Small...

RPM 80762 - Front A-Arms, ARRMA Typhon 4x4 3S BLX, Black (2)Features: Lighter than stock by more than 5 grams per A-arm Extra outer shock mount hole for added adjustability Replaces stock ARRMA #AR330543 Adjustability: We’ve added a second shock mount...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USARPM Jato a-arms do not have provisions for a sway bar kit/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer &...

Designed to increase durabilityReplaces weaker stock components, check for full parts compatibilityReplaces Traxxas stock #3632/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer & Reproductive Harm -...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USARPM #80712 Caster Blocks replace Traxxas stock #3632 Caster Blocks/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer...

For the Traxxas Slash 4x4 and Stampede Front or Rear A-armsTech Notes: Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the...

Designed to increase durabilityReplaces weaker stock components, check for full parts compatibilityReplaces stock Traxxas #3752; 5x11x4mm bearings not includedUp to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or...

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM's front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, and Monster JamTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is a set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede...

For use on the E-Rustler, Stampede, and Monster JamTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is a set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede...

Replaces weaker stock components, check for full parts compatibilityReplaces stock Traxxas #2530 and #2530AFits the Slash 2WD, Nitro Slash, Bandit, Electric Rustler, Nitro Rustler, Nitro Stampede and Electric Stampede 2WD/!\ WARNING: CHOKING HAZARD -...

The RPM Traxxas 2WD Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can...

This is an optional RPM Hybrid Gearbox Housing and Rear Mount Kit, and is intended for use with the Traxxas Slash, Stampede, e-Rustler and Bandit 1/10 scale vehicles. The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2WD vehicles is designed to...

This is an optional RPM Traxxas 4x4 Caster & Spindle Block Set. Since the release of the first Slash 4x4, RPM customers have been asking for stronger front end components that could handle the punishment Traxxas 4wd trucks can dish out. RPM answers the...

This is a set of optional RPM Axle Carriers, and are intended for use with the Traxxas 1/16 E-Revo and 1/16 Slash trucks. There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale...