Delivers 55W of charging powerCharges AND balances Smart G2 batteries with one simple IC3 or IC5 connection - no separate balance lead neededCharges up to 4S LiPo/LiFe/Li-Ion/LiHV batteries and 1-12S NiMH/NiCd packsPowerful 50C continuous discharge...

/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer & Reproductive Harm - California Proposition 65 - www.P65Warnings.ca.gov

Compatible with both EC3 and IC3 plugs.Integrated microchip stores unique parameters for each batterySmart discharge allows batteries to automatically discharge to a safe voltageSave time and hassle, while improving battery lifePowerful 50C...

146 oz-in torque at 6V affords impressive performance in the toughest applicationsPrecise digital controlDual ball bearings provide less resistance for higher performance and longer lifeHeavy-duty metal gear train/!\ WARNING: CHOKING HAZARD - Small...

Maximum Servo Torque:82oz-in, 5.9kg-cm at 6vServo Operating Voltage:6.0VProduct Width: 0.79" (20 mm)Input Voltage: 6vProduct Height: 1.55" (39 mm)Spline Count: 23 - ToothProduct Length: 1.58" (40 mm)Gear Type: Nylon/!\ WARNING: CHOKING...

The RPM Arrma 4x4 Rear Suspension Arm Set is compatible with 4 ɬó4 3S BLX versions of the Granite and Senton. These optional arms offer increased adjustability, improved durability and reduced weight. Adjustability: RPM added a second shock mount to...

The RPM Arrma 4x4 Front Suspension Arm Set offers increased adjustability and improved durability in a lightweight package. Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount, adding...

Replaces weaker stock componentsProudly made in the USAThis is an optional RPM Wide Front Bumper, and is intended for use with the Traxxas Rustler, Stampede and Bandit 1/10 scale vehicles. Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro...

This is an optional RPM Wide Front Bumper, and is intended for use with the Traxxas Stampede 4x4. The Traxxas Stampede 4x4 is a cool truck with lots of nice features built in, but it's missing one critical piece - some serious front-end protection. Not...

RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this...

The RPM Arrma Typhon 4x4 3S BLX Front Suspension Arm Set offers increased adjustability, improved durability and reduced weight. Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount,...

RPM 80762 - Front A-Arms, ARRMA Typhon 4x4 3S BLX, Black (2)Features: Lighter than stock by more than 5 grams per A-arm Extra outer shock mount hole for added adjustability Replaces stock ARRMA #AR330543 Adjustability: We’ve added a second shock mount...

Designed to increase durabilityReplaces weaker stock components, check for full parts compatibilityReplaces Traxxas stock #3632/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer & Reproductive Harm -...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USARPM #80712 Caster Blocks replace Traxxas stock #3632 Caster Blocks/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer...

For the Traxxas Slash 4x4 and Stampede Front or Rear A-armsTech Notes: Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the...

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM's front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, and Monster JamTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is a set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede...