Clearance

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USABearings are not included with these kits (4 bearings are needed for each kit)RPM Traxxas Steering Blocks are the perfect solution for worn bushings and weak 5x8mm...

RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this...

The RPM Arrma 4x4 Front Suspension Arm Set offers increased adjustability and improved durability in a lightweight package. Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount, adding...

Replaces weaker stock componentsProudly made in the USAThis is an optional RPM Wide Front Bumper, and is intended for use with the Traxxas Rustler, Stampede and Bandit 1/10 scale vehicles. Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USARPM Jato a-arms do not have provisions for a sway bar kit/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer &...

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM's front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USAThese rear shock towers can be used on the Traxxas Bandit as well, However, there are no provisions for a rear wing built in/!\ WARNING: CHOKING HAZARD - Small...

The RPM Arrma 4x4 Rear Suspension Arm Set is compatible with 4 ɬó4 3S BLX versions of the Granite and Senton. These optional arms offer increased adjustability, improved durability and reduced weight. Adjustability: RPM added a second shock mount to...

This is a set of optional RPM Axle Carriers, and are intended for use with the Traxxas 1/16 E-Revo and 1/16 Slash trucks. There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale...

This is an optional RPM Traxxas 4x4 Caster & Spindle Block Set. Since the release of the first Slash 4x4, RPM customers have been asking for stronger front end components that could handle the punishment Traxxas 4wd trucks can dish out. RPM answers the...

For the Traxxas Slash 4x4 and Stampede Front or Rear A-armsTech Notes: Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used due to strengthening designs that reduce the clearance around the...

RTO-Counted Cross Stitch Kit. This kit will allow you to create a beautiful landscape design that will make a great decoration for any room of the house once you have completed it. This package contains 100% cotton floss, 14 count Aida fabric, one...

Twist and turn the Perplexus on your way to solving the ultimate puzzle ball, making it through 200 challenging barriers in this intricate labyrinth maze in the shape of a 3x3 Rubik's Cube!A quick learning curve allows for an easy start, but you need to...

Adjustable speed control4 power levelsRed triggerScalextric Hand Controller with adjustable speed control, suitable for use with newer powerbases and START./!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING:...

Looking truly sublime in this fantastic green shade, this dodge Charger stands out anywhere, be it muscling its way downtown, Or flying round your Scalextric layout!Compatible with 1/32 Analog slot setsScalextric DPR compatibleFront and Rear...

Contents: 2 x 175mm Half-straight Push-fit Scalextric track for quick and easy circuit building. Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with C8223 Half Straight...

Contents: Radius 2 Curve 45 degree x 2. Push-fit Scalextric track for quick and easy circuit building.Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with: C8225 Radius 2...

Contents: Radius 3 Curve 22.5 degree x 2. Push-fit Scalextric track for quick and easy circuit building. Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with: C8281 Radius 3...

Contents: 2 x 350mm Standard Straight Push-fit Scalextric track for quick and easy circuit building. Connect modern Scalextric track to original track (which has ring-shaped connectors) using the C8222 Converter Straight. Shown with C8233 Lead In and...