RPM

The RPM Arrma Typhon 4x4 3S BLX Front Suspension Arm Set offers increased adjustability, improved durability and reduced weight. Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount,...

Designed to increase durabilityReplaces weaker stock components, check for full parts compatibilityReplaces stock Traxxas #3752; 5x11x4mm bearings not includedUp to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or...

Replaces weaker stock componentsProudly made in the USASold in sets of one upper and one lower A-armThis is a set of the blue left front suspension arms for the Traxxas Revo by RPM. They are much stronger than the original stock arms. Each package...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USARPM #80712 Caster Blocks replace Traxxas stock #3632 Caster Blocks/!\ WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs./!\ WARNING: Cancer...

NOTE: This part is not compatible with Traxxas Rustler VXL trucks. Replaces weaker stock componentsProudly made in the USABroken parts lead to trips to the hobby shop and lots of down time to repair your vehicle! RPM's heavy duty camber links will...

Replaces weaker stock componentsProudly made in the USAThis is an optional RPM Wide Front Bumper, and is intended for use with the Traxxas Rustler, Stampede and Bandit 1/10 scale vehicles. Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro...

Replaces weaker stock componentsProudly made in the USAThis is an optional RPM Wide Front Bumper, and is intended for use with the Traxxas Rustler, Stampede and Bandit 1/10 scale vehicles. Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro...

This is an optional pack of RPM EXC Torment, Ruckus & Circuit Rear A-Arms. They're stronger than stock, beefier to help survivability during those unexpected incidents, and built to tighter tolerances, making critical suspension settings much easier to...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

For use on the E-Rustler, Stampede, Monster Jam, and SlashTech Note: These A-arms will not work on the nitro versions of the Rustler & Stampede.This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USABearings are not included with these kits (4 bearings are needed for each kit)RPM Traxxas Steering Blocks are the perfect solution for worn bushings and weak 5x8mm...

RPM shock towers for Traxxas 1/10th scale trucks are designed to add strength and support to the front-end suspension components of these great vehicles. Our shock towers maintain all stock geometry while adding much needed structural strength to this...

The RPM Arrma 4x4 Front Suspension Arm Set offers increased adjustability and improved durability in a lightweight package. Adjustability: RPM added a second shock mount to both the front and rear A-arms to the outside of the stock shock mount, adding...

Replaces weaker stock componentsProudly made in the USAThis is an optional RPM Wide Front Bumper, and is intended for use with the Traxxas Rustler, Stampede and Bandit 1/10 scale vehicles. Give that Traxxas Nitro or Electric Rustler, Stampede, Nitro...

This is an optional RPM Hybrid Gearbox Housing and Rear Mount Kit, and is intended for use with the Traxxas Slash, Stampede, e-Rustler and Bandit 1/10 scale vehicles. The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2WD vehicles is designed to...

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM's front and rear bearing carriers allow e-Rustler, e-Stampede, Slash & Bandit...

Designed to increase durabilityReplaces weaker stock componentsProudly made in the USAThese rear shock towers can be used on the Traxxas Bandit as well, However, there are no provisions for a rear wing built in/!\ WARNING: CHOKING HAZARD - Small...

The RPM Arrma 4x4 Rear Suspension Arm Set is compatible with 4 ɬó4 3S BLX versions of the Granite and Senton. These optional arms offer increased adjustability, improved durability and reduced weight. Adjustability: RPM added a second shock mount to...

This is a set of optional RPM Axle Carriers, and are intended for use with the Traxxas 1/16 E-Revo and 1/16 Slash trucks. There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale...

The RPM Traxxas 2WD Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. RPM engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can...